Featured
How To Install A Hard Tonneau Cover
How To Install A Hard Tonneau Cover. Follow along with the video as we work. Slide the lip of the rear clamp under the edge of the bed.

It is very important for a proper installation and fitment. Follow along with the video as we work. You can get aid from someone to do the job.
Slide The Lip Of The Rear Clamp Under The Edge Of The Bed.
Some tonneau covers are installed using rails and clamps that must be bolted on. Pull the clamp handle down to lock it under the bed rim. Lift the tonneau over the truck bed and gently lower it until the rails snap into place.
Release The Two Rear Clamps.
If not, push down slightly as it may be held back by friction. Take a toothed clamp and attach it to the bottom of the side rail. Prepare two frames with the 1x2 wood, one will be fixed to the trunk and the second will be the lifting part.
Ensure The Tonneau Cover Fits Properly And Is Securely Fastened To The Truck.
Make sure the side rail is in line with the cab of the truck bed. Installing a hard tonneau cover it is recommended that hard tonneau covers including hinged models and folding models should be installed by a professional. Shims (little plastic or rubber parts to fill gaps).
The Cover Should Reach The Tailgate.
Attach the cover from underneath using screws starting at the front towards the tailgate. How to install a hard tonneau cover necessary tools. These frames will be responsable of holding the cover to the car, they will also give estructural strength to the cover, so people could.
Otherwise, You Will Have To Readjust The Side Railings So That The Cover Can Fit.
Align the cover with the side rails. Follow along with the video as we work. The most popular tonneau covers on the market today will probably fit one of the following four installation methods:
Comments
Post a Comment